- Phase identification at all voltage levels in real time
- GPS connection and GPS cache (1 h buffer)
- Measurement on LV, HV, and capacitive test points
- Easy to operate via touch display
- Eliminates safety hazards
- Fast and precise phase identification
- Saves time and money
The PVS100i system consists of two identical devices: the base station and the mobile unit. The difference is defined in the menu and it is easy to operate via the touch screen. The base station is connected to a known phase that serves as a reference. The phase positions at every voltage level can be identified with the mobile unit by comparing the actual phase angle with the angle of the reference phase.
Both devices are synchronised via a GSM connection and the phase assignment is displayed immediately. The GPS time signal is used to provide a highly accurate time base, which is stored for one hour via the internal cache.
The PVS100i can be used anywhere thanks to its built-in rechargeable battery. The system is directly connected to the test object at network voltages of up to 400 V. At higher voltages of up to 120 kV, the test is performed using a high voltage sensor that communicates with the PVS100i mobile unit via bidirectional wireless.
The bright LEDs on the voltage sensor (which are even visible in sunlight) signal its activation as well as the phase identification. This makes it unnecessary to have visual contact with the mobile unit during the test and you can keep your eyes on the sensor. The measured data can be saved immediately on a USB stick.